Alcatel-Lucent 7750 SR OS - Configuring IES Interface Parameters

Internet Enhanced Services
7750 SR OS Services Guide Page 693
Configuring IES Interface Parameters
Refer to IES Services Command Reference on page 705 for CLI syntax.
The following displays the command usage to configure IES interface parameters:
Example: config>service# ies 1000
config>service>ies$ interface to-web create
config>service>ies>if$ address 10.1.1.1/24
config>service>ies>if# no shutdown
The following example displays the IES configuration:
A:ALA-48>config>service>ies>if# info
----------------------------------------------
address 10.1.1.1/24
sap 2/1/10:50 create
ingress
qos 100
exit
egress
scheduler-policy "SLA1"
exit
exit
vrrp 1 owner
authentication-type password
authentication-key "3WErEDozxyQ" hash
exit
----------------------------------------------
A:ALA-48>config>service>ies>if#