Alcatel-Lucent 7750 SR OS - Common Configuration Tasks

Virtual Private LAN Services
7750 SR OS Services Guide Page 375
Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to configure both local
and distributed VPLS services and provides the CLI commands.
For egress multicast groups (optional):
1. Define egress multicast group name(s)
2. Specify the destinations per pass
3. Define SAP common requirements
For VPLS services:
1. Associate VPLS service with a customer ID
2. Define SAPs:
— Select node(s) and port(s)
— Optional - select QoS policies other than the default (configured in
config>qos
context)
— Optional - select filter policies (configured in
config>filter context)
— Optional - select accounting policy (configured in
config>log context)
— Optional - specify SAP egress multicast-group name
3. Associate SDPs for (distributed services)
4. Modify STP default parameters (optional) (see VPLS and Spanning Tree Protocol on page
335)
5. Enable service