Configuring a VPRN Service with CLI
Page 880 7750 SR OS Services Guide
List of Commands
Table 31 lists all the service configuration commands indicating the configuration level at which
each command is implemented with a short command description. VPRN services are configured
in the
config>service>vprn context. The command list is organized in the following task-
oriented manner:
• Configure a VPRN service
• Configure VPRN service parameters
→ Configure VPRN IGMP parameters
→ Configure VPRN spoke SDP parameters
• Configure VPRN subscriber interface parameters
→ Configure VPRN subscriber interface group interface parameters
• Configure VPRN service PIM parameters
→ Configure VPRN service PIM interface parameters
• Configure VPRN interface parameters
→ Configure VPRN interface SAP parameters
→ Configure SAP subscriber management parameters
→ Configure VPRN interface SAP ATM parameters
→ Configure VPRN interface DHCP parameters
→ Configure VPRN interface VRRP parameters
• Configure VPRN BGP parameters
→ Configure group level VPRN BGP group parameters
→ Configure group level VPRN BGP neighbor parameters
• Configure VPRN RIP parameters
→ Configure VPRN RIP group parameters
→ Configure VPRN RIP neighbor parameters
• Configure VPRN OSPF parameters
Table 1: CLI Commands to Configure VPRN Service Parameters
Command Description Page
Configure a VPRN service
903
config>service>vprn
service-id
Specifies a unique service identification number identifying the service
in the service domain.
954
To Next Page
Loading...
