Alcatel-Lucent 7750 SR OS - Figure 11: Subscriber Service Components; Service Components

Service Creation Process Overview
Page 50 7750 SR OS Services Guide
Service Components
Figure 11 displays the basic components of a subscriber service.
Figure 11: Subscriber Service Components
• Customer ID — This is the subscriber ID used to associate information with a particular
customer.
• Service type — The service type specifies the connectivity type such as Epipe, VPLS, or
IES.
• Service ID — Each service is uniquely identified by a Service ID within a service area.
• SAP — The subscriber-side service entry (access) and exit point for a service on an
Alcatel-Lucent 7750 SR router.
• Interface — Configure a logical IP routing interface for Internet Ethernet Service (IES),
Virtual Private LAN Service (VPLS), and Virtual Private Routed Network (VPRN)
services.
• Port ID — The physical port identifier portion of the SAP definition.
• QoS policy — The QoS policy associated with an ingress or egress SAP or IP interface.
QoS policy ID 1 is the default.
• Filter policy — Optional. The IP or MAC filter policy associated with an ingress or egress
SAP or IP interface.
• Scheduler policy — Optional. A scheduler policy defines the hierarchy and operating
parameters for virtual schedulers. This implementation of hierarchical scheduling is a
method that defines a bounded operation for a group of queues. One or more queues are
CUSTOMER ID:
SERVICE TYPE
SERVICE ID
SAP (for EPIPE and VPLS services)
PORT ID
QoS POLICY (default)
FILTER POLICY (optional)
SDP ID (for distributed services)
FAR-END
LSP (for MPLS encapsulation)
SCHEDULER POLICY (optional)
INGRESS
EGRESS
INTERFACE (for IES and VPRN services)
SAP
PORT ID
QoS POLICY (default)
FILTER POLICY (optional)
SCHEDULER POLICY (optional)
INGRESS
EGRESS