Alcatel-Lucent 7750 SR OS - Modifying CCAG Parameters on a Network IP Interface; Modifying CCAG Parameters

Versatile Service Module
7750 SR OS Services Guide Page 1257
Modifying CCAG Parameters on a Network IP Interface
CLI Syntax: config# router [router-name]
interface interface-name
shutdown
no port ccag-ccag-id.{a|b}[.net-sap]:cc-id
The following example displays the command usage:
Example: config>router# interface ccanet
config>router>if# address 3.1.1.1/24
config>router>if# exit
A:ALA-48>config>router# info
----------------------------------------------
#------------------------------------------
echo "IP Configuration"
#------------------------------------------
...
interface "ccanet"
address 3.1.1.1/24
port ccag-1.a.net-sap:200
mac 00:00:00:00:00:ff
exit
interface "ccanet2"
address 4.1.1.1/24
port ccag-1.b.net-sap:300
static-arp 4.1.1.2 00:00:00:00:00:aa
exit
...
#------------------------------------------
A:ALA-48>config>router#
Modifying CCAG Parameters
CLI Syntax: config>vsm#
ccag ccag-id [create]
no ccag ccag-id [force]
access {link|distribute}
adapt-qos
cca-rate kilobits-per-second
no cca-rate
description description-string
no description
[no] member-cca card-slot/mda-number
path {a|b}
no shutdown