Alcatel-Lucent 7750 SR OS - Page 150

Configuring a VLL Service with CLI
Page 150 7750 SR OS Services Guide
Table 1: CLI Commands to Configure VLL Service Parameters
Command Description Page
Configure an Epipe service
config>service# epipe service-id customer customer-id [vpn vpn-id] [vc-switching]
service-id
Specifies a unique service identification number identifying the
service in the service domain.
235
customer
Specifies the customer ID number to be associated with the service. 235
vpn vpn-id
Specifies the VPN ID number which allows you to identify virtual
private networks (VPNs) by a VPN identification number.
235
description
Specifies a text string describing the Epipe service. 234
service-mtu
Configures the service payload MTU in bytes for the service ID
overriding the service-type default MTU.
239
no shutdown
Administratively enables the service. 233
Configure an Epipe SAP
config>service>epipe# sap sap-id
accounting-policy
Associates the accounting policy ID to the SAP. Accounting policies
are configured in the
config>log context.
248
collect-stats
Enables the collection of accounting and statistical data for the SAP,
network port, or IP interface.
248
description
Specifies a text string describing the SAP. 234
multi-service-site
Associates a customer site with the customer-site-name parameter. 246
no shutdown
Administratively enables the SAP. 233
Configure Epipe SAP ATM parameters
config>service>epipe>sap# atm
atm
Enables access to the context to configure ATM-related attributes. 274
egress
Configures egress ATM attributes for the SAP. 274
encapsulation
Specifies the data encapsulation for an ATM PVCC delimited SAP. 275
traffic-desc
Assigns an ATM traffic descriptor profile to a given context (for
example a SAP).
275
ingress
Configures ingress ATM attributes for the SAP. 274
oam
Enables the context to configure OAM functionality for a PVCC
delimiting a SAP.
276
alarm-cells
Configures AIS/RDI fault management on a PVCC. 276
Configure Epipe SAP egress parameters
config>service>epipe>sap# egress