VLL Service Configuration Commands
Page 274 7750 SR OS Services Guide
ATM Commands
atm
Syntax atm
Context config>service>epipe>sap
config>service>apipe>sap
config>service>ipipe>sap
config>service>epipe>sap
Description This command enables access to the context to configure ATM-related attributes. This command can
only be used when a given context (for example, a channel or SAP) supports ATM functionality such
as:
• Configuring ATM port or ATM port-related functionality on MDAs supporting ATM functional-
ity
• Configuring ATM-related configuration for ATM-based SAPs that exist on MDAs supporting
ATM functionality.
If ATM functionality is not supported for a given context, the command returns an error.
egress
Syntax egress
Context config>service>epipe>sap
config>service>epipe>sap>atm
config>service>apipe>sap>atm
config>service>fpipe>sap
This command configures egress ATM attributes for the SAP.
ingress
Syntax ingress
Context config>service>epipe>sap
config>service>epipe>sap>atm
config>service>epipe>sap
config>service>apipe>sap>atm
Description This command configures ingress ATM attributes for the SAP.
To Next Page
Loading...
