Global Service Configuration Commands
Page 84 7750 SR OS Services Guide
bpgrp keyword
type ima
bpgrp-num 1 — 1280
ccag-id ccag-id.path-id[cc-type]:cc-id
ccag keyword
id 1 — 8
path-id a, b
cc-type .sap-net, .net-sap]
cc-id 0 — 4094
lag-id lag-id
lag keyword
id 1 — 200
card slot-number — The card keyword is used to assign the multi-service customer site to the slot-
number given. When the multi-service customer site has been assigned to a specific slot in the
chassis, all SAPs associated with this customer site must be on a service owned by the customer
and created on the defined chassis slot.
The defined slot must already have been pre-provisioned on the system but need not be installed
when the customer site assignment is made.
Values Any pre-provisioned slot number for the chassis type that allows SAP creation
slot-number 1 — 10
ingress
Syntax ingress
Context config>service>customer>multi-service-site
Description This command enables the context to configure the ingress node associate an existing scheduler
policy name with the customer site. The ingress node is an entity to associate commands that
complement the association.
egress
Syntax egress
Context config>service>customer>multi-service-site
Description This command enables the context to configure the egress node associate an existing scheduler policy
name with the customer site. The egress node is an entity to associate commands that complement the
association.
To Next Page
Loading...
