Alcatel-Lucent 7750 SR OS - Page 1454

OAM and SAA Command Reference
Page 1456 7750 SR OS Services Guide
Syntax path-discovery
Context config>test-oam>ldp-treetrace
Description This command enables the context to configure path discovery parameters.
interval
Syntax interval minutes
no interval
Context config>test-oam>ldp-treetrace>path-discovery
Description This command configures the time to wait before repeating the LDP Tree auto discovery process.
Default 60
Parameters minutes — Specifies the number of minutes to wait before repeating the LDP Tree auto discovery
process.
Values 60 — 1440
max-path
Syntax max-path max-paths
Context config>test-oam>ldp-treetrace>path-discovery
Description This command configures specifies the maximum number of paths that can be discovered for a
selected IP address FEC.
Default 128
Parameters max-paths — Specifies the tree discovery maximum path.
Values 1 — 128
max-ttl
Syntax max-ttl ttl-value
Context config>test-oam>ldp-treetrace>path-discovery
Description This command configures the maximum label time-to-live value for an LSP trace request during the
tree discovery.
Default 30
Parameters ttl-value — Specifies the maximum label time-to-live value for an LSP trace request during the tree
discovery.
Values 1 — 255