Alcatel-Lucent 7750 SR OS - Page 183

Virtual Leased Line Services
7750 SR OS Services Guide Page 183
Configuring Fpipe SAP Parameters
Fpipe SAP
Other VPRN parameters
Use the following CLI syntax to configure Fpipe SAP parameters.
CLI Syntax: config>service# fpipe service-id [customer customer-id] [vpn
vpn-id] [vc-type {fr-dlci}] [vc-switching]
sap sap-id
accounting-policy acct-policy-id
collect-stats
description description-string
egress
filter [ip ip-filter-id]
qos policy-id
scheduler-policy scheduler-policy-name
ingress
filter [ip ip-filteri-d]
qos policy-id [shared-queuing]
scheduler-policy scheduler-policy-name
multi-service-site customer-site-name
no shutdown
The following example displays the command usage to create an Fpipe SAP:
PE router 1 (A:ALA-41):
Example: A:ALA-41>config>service# fpipe 1
A:ALA-41>config>service>fpipe# sap 1/2/1:16 create
A:ALA-41>config>service>fpipe>sap# ingress
A:ALA-41>config>service>fpipe>sap>ingress# qos 101
A:ALA-41>config>service>fpipe>sap>ingress# exit
A:ALA-41>config>service>fpipe>sap# egress
A:ALA-41>config>service>fpipe>sap>egress# qos 1020
A:ALA-41>config>service>fpipe>sap>egress# exit
A:ALA-41>config>service>fpipe>sap# no shutdown
A:ALA-41>config>service>fpipe>sap# exit
A:ALA-41>config>service>fpipe#
PE router 2 (A:ALA-42):
Example: A:ALA-42>config>service# fpipe 1
A:ALA-42>config>service>fpipe# sap 2/1/1.1:16 create
A:ALA-42>config>service>fpipe>sap# ingress
A:ALA-42>config>service>fpipe>sap>ingress# qos 101
A:ALA-42>config>service>fpipe>sap>ingress# exit
A:ALA-42>config>service>fpipe>sap# egress
A:ALA-42>config>service>fpipe>sap>egress# qos 1020
A:ALA-42>config>service>fpipe>sap>egress# exit
A:ALA-42>config>service>fpipe>sap# no shutdown
A:ALA-42>config>service>fpipe>sap# exit
A:ALA-42>config>service>fpipe#