VPRN Service Configuration Commands
Page 1104 7750 SR OS Services Guide
Parameters policy — A route policy statement name.
message-size
Syntax message-size max-num-of-routes
no message-size
Context config>service>vprn>rip
config>service>vprn>rip>group
config>service>vprn>rip>group>neighbor
Description This command sets the maximum number of routes per RIP update message.
The no form of the command resets the maximum number of routes back to the default of 25.
Default no message-size
Parameters size — Integer.
Default 25
Values 25 — 255
metric-in
Syntax metric-in metric
no metric-in
Context config>service>vprn>rip
config>service>vprn>rip>group
config>service>vprn>rip>group>neighbor
Description This command sets the metric added to routes that were received from a RIP neighbor.
The no form of the command reverts the metric value back to the default.
Default no metric-in
Parameters metric — The value added to the metric of routes received from a RIP neighbor, expressed as a
decimal integer.
Values 1 — 16
metric-out
Syntax metric-out metric
no metric-out
Context config>service>vprn>rip
config>service>vprn>rip>group
config>service>vprn>rip>group>neighbor
To Next Page
Loading...
