Alcatel-Lucent 7750 SR OS - Page 1158

VPRN Service Configuration Commands
Page 1158 7750 SR OS Services Guide
*A:ALA-12# show router 3 aggregate
==============================================================================
Aggregates (Service: 3)
==============================================================================
Prefix Summary AS Set Aggr AS Aggr IP-Address State
------------------------------------------------------------------------------
------------------------------------------------------------------------------
No. of Aggregates: 0
-----------------------------------------------------------
*A:ALA-12#
arp
Syntax arp [ip-address | ip-int-name | mac ieee-mac-addr]
Context show>router
Description This command displays the router ARP table sorted by IP address.
If no command line options are specified, all ARP entries are displayed.
Parameters ip-addr — Only displays ARP entries associated with the specified IP address.
ip-int-name — Only displays ARP entries associated with the specified IP interface name.
mac ieee-mac-addr — Only displays ARP entries associated with the specified MAC address.
Output ARP Table Output — The following table describes ARP table output fields:
Sample Output
*A:ALA-12# show router 3 arp
===============================================================================
ARP Table (Service: 3)
===============================================================================
IP Address MAC Address Expiry Type Interface
Label Description
IP Address
The IP address of the ARP entry.
MAC Address
The MAC address of the ARP entry.
Expiry
The age of the ARP entry.
Type
Dyn — The ARP entry is a dynamic ARP entry.
Inv — The ARP entry is an inactive static ARP entry (invalid).
Oth — The ARP entry is a local or system ARP entry.
Sta — The ARP entry is an active static ARP entry.
Interface
The IP interface name associated with the ARP entry.
No. of ARP Entries
The number of ARP entries displayed in the list.