VPRN Service Configuration Commands
Page 1180 7750 SR OS Services Guide
summary
Syntax summary [all]
Context show>router>bgp
Description This command displays a summary of BGP neighbor information.
If confederations are not configured, that portion of the output will not display.
The “State” field displays the global BGP operational state. The valid values are:
Up - BGP global process is configured and running.
Down - BGP global process is administratively shutdown and not running.
Disabled - BGP global process is operationally disabled. The process must be restarted by the
operator.
For example, if a BGP peer is operationally disabled, then the state in the summary table shows
the state ‘Disabled’
Parameters all — Displays BGP peers in all instances.
Output Show BGP Summary Output — The following table describes the command output fields for a
BGP summary:
Label Description
BGP Router ID
The local BGP router ID.
AS
The configured autonomous system number.
Local AS
The configured local AS setting, if not configured it is the same as the
system AS.
BGP Admin State
Down — BGP is administratively disabled.
Up — BGP is administratively enabled.
BGP Oper State
Down — BGP is operationally disabled.
Up — BGP is operationally enabled.
Confederation AS
The configured confederation AS.
Member Confeder-
ations
The configured members of the BGP confederation.
Number of Peer
Groups
The total number of configured BGP peer groups.
Number of Peers
The total number of configured BGP peers.
Total BGP Active
Routes
The total number of BGP routes used in the forwarding table.
Total BGP Routes
The total number of BGP routes learned from BGP peers.
To Next Page
Loading...
