VPRN Service Configuration Commands
Page 1182 7750 SR OS Services Guide
10.0.0.16 65206 5 9636 0 50 00h01m29s 6/0/86683
10.0.27.1 2 0 0 0 0 00h01m29s Active
10.0.28.1 60203 22512 15 0 0 00h01m29s 116955/86689/9
===============================================================================
*A:ALA-12#
ecmp
Syntax ecmp
Context show>router
Description This command displays the ECMP settings for the router.
Output Show ECMP Settings Output — The following table describes the output fields for the router
ECMP settings.
Sample Output
*A:ALA-12# show router 3 ecmp
===============================================================================
Router ECMP
===============================================================================
Instance Router Name ECMP Configured-ECMP-Routes
-------------------------------------------------------------------------------
1 Base True 8
===============================================================================
*A:ALA-12#
interface
Syntax interface [{[ip-address | ip-int-name] [detail]}] | [summary] | [exclude-services]
Description This command displays the router IP interface table sorted by interface index.
Parameters ip-address — Only displays the interface information associated with the specified IP address.
ip-int-name — Only displays the interface information associated with the specified IP interface
name.
detail — Displays detailed IP interface information.
summary — Displays summary IP interface information for the router.
Label Description
Instance
The router instance number.
Router Name
The name of the router instance.
ECMP
False — ECMP is disabled for the instance.
True — ECMP is enabled for the instance.
Configured-ECMP-Routes
The number of ECMP routes configured for path sharing.