Alcatel-Lucent 7750 SR OS - Page 1249

Versatile Service Module
7750 SR OS Services Guide Page 1251
Use the following CLI syntax to configure CCAG a a network IP interface.
CLI Syntax: config# router [router-name]
interface interface-name
port ccag-ccag-id.{a|b}[.net-sap]:cc-id
address {ip-address/mask |ip-address netmask} [broadcast
all-ones|host-ones]
mac ieee-address
The following example displays the command usage:
Example: config# router
config>router# interface ccanet
config>router>if$ address 2.1.1.1/24
config>router>if# port ccag-1.a.net-sap:200
config>router>if# exit
config>router# interface ccanet2
config>router>if$ address 4.1.1.1/24
config>router>if# port ccag-1.b.net-sap:300
config>router>if# static-arp 4.1.1.2 00:00:00:00:00:aa
config>router>if# exit
config>router#
A:ALA-48>config>router# info
----------------------------------------------
#------------------------------------------
echo "IP Configuration"
#------------------------------------------
...
interface "ccanet"
address 2.1.1.1/24
port ccag-1.a.net-sap:200
mac 00:00:00:00:00:ff
exit
interface "ccanet2"
address 4.1.1.1/24
port ccag-1.b.net-sap:300
static-arp 4.1.1.2 00:00:00:00:00:aa
exit
...
#------------------------------------------
A:ALA-48>config>router#