Alcatel-Lucent 7750 SR OS - Page 1258

Service Management Tasks
Page 1260 7750 SR OS Services Guide
no resv-cbs
slope-policy slope-policy-name
no slope-policy
mac ieee-address
no mac
mtu mtu-bytes
no mtu
weight path-weight
no weight
The following example displays the command usage to provision CCAG path parameters:
Example:config>vsm# ccag 1
config>vsm>ccag# path a
config>vsm>ccag>path# no weight
config>vsm>ccag>path# net-sap
config>vsm>ccag>path>net-sap# queue-policy nq1
config>vsm>ccag>path>net-sap# egress
config>vsm>ccag>path>net-sap>egr# pool
config>vsm>ccag>path>net-sap>egr>pool# slope-policy A
config>vsm>ccag>path>net-sap>egr>pool# exit
config>vsm>ccag>path>net-sap>egr# exit
config>vsm>ccag>path>net-sap# exit
config>vsm>ccag>path# exit
config>vsm>ccag# path b
config>vsm>ccag>path# no rate
config>vsm>ccag>path# sap-sap
config>vsm>ccag>path>sap-sap# egress
config>vsm>ccag>path>sap-sap>egr# pool
config>vsm>ccag>path>sap-sap>egr>pool#
config>vsm>ccag>path>sap-sap>egr>pool# slope-policy B
config>vsm>ccag>path>sap-sap>egr>pool# exit
config>vsm>ccag>path>sap-sap>egr# exit
config>vsm>ccag>path>sap-sap# exit
config>vsm>ccag>path# exit
config>vsm>ccag#
The following example displays the configuration:
A:ALA-48>config>vsm# info
----------------------------------------------
ccag 1 create
description "VSM test"
member-cca 10/1
member-cca 10/2
path a
net-sap
queue-policy "nq1"
egress