Versatile Service Module
7750 SR OS Services Guide Page 1283
Description This command enables collecting stats on the path’s net-sap context. When enabled the statistics
defined in the accounting-policy accounting-policy command will be collected according to the
specifications in the policy.
The no form of the command disables network billing statistics collection on the net-sap context.
Default Network statistics are not collected by default on the net-sap context
queue-policy
Syntax queue-policy queue-policy-name
no queue-policy
Context config>vsm>ccag ccag-id>path {a | b}>net-sap
Description This command defines the egress network queues used by IP interfaces bound to the path’s net-sap
context. The specified queue-policy-name defines the number of queues, the rate and buffering
parameters for the queues and the forwarding class mappings to the queues.
The no form of the command reverts the path’s net-sap network IP interface queues to the systems
default queue policy.
Parameters queue-policy-name — Specifies which existing Queue Policy will define the queuing structure for
network IP interfaces bound to the path’s net-sap context.
Values Any existing queue policy on the system
Default The default queue policy is used when another is not specified
egress
Syntax egress
Context config>vsm>ccag ccag-id>path {a | b}>net-sap
Description This command changes the current CLI context to the path>net-sap>egress nodal context. This
context contains the egress buffer pool configuration commands.
The CCA path net-sap egress nodal context always exists and cannot be removed.
pool
Syntax pool
Context config>vsm>ccag ccag-id>path {a | b}>net-sap>egress
Description This command changes the current CLI context to the path>net-sap>egress pool>nodal context. This
context contains the egress buffer pool configuration commands.
To Next Page
Loading...
