Mirror Services
7750 SR OS Services Guide Page 1331
The following displays the mirror destination, which is on ALA-A, configuration for mirror
service 1216. This configuration specifies that the mirrored traffic coming from the mirror source
(10.10.0.91) is to be directed to SAP 4/1/58 and states that the service only accepts traffic from far
end 10.10.0.92 (ALA-B) with an ingress service label of 5678. When a forwarding class is
specified, then all mirrored packets transmitted to the destination SAP or SDP override the default
(be) forwarding class. The slice size limits the size of the stream of packet through the 7750 SR
and the core network.
Figure 4: Remote Mirrored Service Tasks
The following example displays the CLI commands to configure remote mirrored service 1216.
The traffic ingressing and egressing port 1/1/60 on 10.10.0.92 (ALA-B) will be mirrored to the
destination SAP 4/1/58:0 on ALA-A.
Example: *A:ALA-A>config>mirror# mirror-dest 1216 create
config>mirror>mirror-dest$ description "Receiving mirrored
traffic from .91"
config>mirror>mirror-dest# sap 1/1/14:0 create
config>mirror>mirror-dest>sap$ exit
config>mirror>mirror-dest# no shutdown
config>mirror>mirror-dest# remote-source
config>mirror>mirror-dest>remote-source# far-end
10.10.0.91 ing-svc-label 5678
config>mirror>mirror-dest>remote-source# exit
OSSG030
Sniffer
SDP 4
System IP
10.10.0.92/32
System IP
10.10.0.91/32
ALA-A ALA-B
Destination
SDP 4
Remote
Source
Mirror
Source
Port 1/1/60 ingress/egress
Mirror
Destination
SAP 4/1/58:0
To Next Page
Loading...
