Configuration Commands
Page 1344 7750 SR OS Services Guide
The shutdown command places the mirror destination service or mirror source into an administra-
tively down state. The mirror-dest service ID must be shut down in order to delete the service ID,
SAP or SDP association from the system.
The default state for a mirror destination service ID is shutdown. A no shutdown command is
required to enable the service.
Mirror Source — Mirror sources do not need to be shutdown in order to remove them from the sys-
tem.
When a mirror source is shutdown, mirroring is terminated for all sources defined locally for the
mirror-dest service ID. If the remote-source command has been executed on the mirror-dest asso-
ciated with the shutdown mirror-source, mirroring continues for remote sources.
The default state for a mirror source for a given mirror-dest service ID is no shutdown. A shutdown
command is required to disable mirroring from that mirror-source.
To Next Page
Loading...
