OAM and SAA Command Reference
Page 1398 7750 SR OS Services Guide
wait milliseconds — The time in milliseconds to wait for a response to a probe, expressed as a
decimal integer.
Default 5000
Values 1 — 60000
no-dns — When the no-dns keyword is specified, DNS lookups of the responding hosts will not be
performed, only the IP addresses will be printed.
Default DNS lookups are performed
source ip-address — The source IP address to use as the source of the probe packets in dotted
decimal notation. If the IP address is not one of the device’s interfaces, an error is returned.
tos type-of-service — The type-of-service (TOS) bits in the IP header of the probe packets, expressed
as a decimal integer.
Values 0 — 255
router router-name — Specify the alphanumeric character string up to 32 characters.
Default Base
router service-id — The unique service identification number identifying the service in the service
domain. This ID must be unique to this service and may not be used for any other service of any
type. The service-id must be the same number used for every 7750 SR on which this service is
defined.
Values 1 — 2147483647
To Next Page
Loading...
