OAM and SAA Command Reference
Page 1412 7750 SR OS Services Guide
host-connectivity-verify subscriber sub-ident-string [sla-profile sla-profile-name]
Context <GLOBAL>
Description This command enables host connectivity verification checks.
Parameters service service-id — Specifies the service ID to diagnose or manage.
Values 1 — 2147483647
sap sap-id — Specifies the physical port identifier portion of the SAP definition.
Values sap-id:null[port-id | bundle-id | lag-id | aps-id]
dot1q [port-id | bundle-id | lag-id | aps-id]:qtag1
qinq [port-id | bundle-id | lag-id]:qtag1.qtag2
atm [port-id | bundle-id][:vpi/vci | vpi | vpi1.vpi2]
frame [port-id | bundle-id]:dlci
cisco-hdlc slot/mda/port.channel
ima-grp bundle-id[:vpi/vci | vpi | vpi1.vpi2]
port-id slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 64
bundle-type
-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 — 128
ccag-id ccag-id.path-id[cc-type]:cc-id
ccag keyword
id 1 — 8
path-id a, b
cc-type .sap-net, .net-sap]
cc-id 0 — 4094
lag-id lag-id
lag keyword
id 1 — 64
qtag1 0 — 4094
qtag2 *, 0 — 4094
vpi NNI 0 — 4095
UNI 0 — 255
vci 1, 2, 5 — 65535
dlci 16 — 1022
port-id — Specifies the physical port ID in the slot/mda/port format.
If the card in the slot has Media Dependent Adapters (MDAs) installed, the port-id must be in
the slot_number/MDA_number/port_number format. For example 6/2/3 specifies port 3 on
MDA 2 in slot 6.
The port-id must reference a valid port type. When the port-id parameter represents SONET/
SDH and TDM channels, the port ID must include the channel ID. A period “.” separates the
physical port from the channel-id. The port must be configured as an access port.
To Next Page
Loading...
