OAM and SAA Command Reference
Page 1414 7750 SR OS Services Guide
sub-profile sub-profile-name — Specifies an existing subscriber profile name. The subscriber profile
is configured in the config>subscr-mgmt>sub-profile context.
sla-profile sla-profile-name — Specifies an existing SLA profile name. The SLA profile is
configured in the config>subscr-mgmt>sla-profile context.
vprn-ping
Syntax vprn-ping service-id source ip-address destination ip-address [fc fc-name [profile [in |
out]] [size size] [ttl vc-label-ttl] [return-control] [interval interval] [count send-count]
[timeout timeout]
Context <GLOBAL>
config>saa>test>type
Description This command performs a VPRN ping.
Parameters service service-id — The VPRN service ID to diagnose or manage.
Values 1 — 2147483647
source ip-address — The IP prefix for the source IP address in dotted decimal notation.
Values 0.0.0.0 — 255.255.255.255
destination ip-address — The IP prefix for the destination IP address in dotted decimal notation.
Values 0.0.0.0 — 255.255.255.255
fc-name — The forwarding class of the MPLS echo request encapsulation.
Default be
Values be, l2, af, l1, h2, ef, h1, nc
profile {in | out} — The profile state of the MPLS echo request encapsulation.
Default out
size octets — The OAM request packet size in octets, expressed as a decimal integer.
Values 1 — 65535
ttl vc-label-ttl — The TTL value in the VC label for the OAM request, expressed as a decimal
integer.
Default 255
Values
1 — 255
return-control — Specifies the response to come on the control plane.
interval interval — The interval parameter in seconds, expressed as a decimal integer. This
parameter is used to override the default request message send interval and defines the minimum
amount of time that must expire before the next message request is sent.
To Next Page
Loading...
