OAM and SAA Command Reference
Page 1448 7750 SR OS Services Guide
Multiple Response Connectivity Tests — When the connectivity test count is greater than one
(1), a single line is displayed per SDP Echo Request send attempt.
The request number is a sequential number starting with 1 and ending with the last request sent,
incrementing by one (1) for each request. This should not be confused with the message-id contained
in each request and reply message.
A response message indicates the result of the message request. Following the response message is
the round trip time value. If any reply is received, the round trip time is displayed.
After the last reply has been received or response timed out, a total is displayed for all messages sent
and all replies received. A maximum, minimum and average round trip time is also displayed. Error
response and timed out requests do not apply towards the average round trip time.
Multiple Response Round Trip Connectivity Test Sample Output
A:router1> sdp-ping 6 resp-sdp 101size 1514 count 5
Request Response RTT
---------- ---------- -------
1 Success 10ms
2 Success 15ms
3 Success 10ms
4 Success 20ms
5 Success 5ms
Sent: 5 Received: 5
Min: 5ms Max: 20ms Avg: 12ms
To Next Page
Loading...
