Alcatel-Lucent 7750 SR OS - Page 1472

Tools Configuration Commands
Page 1474 7750 SR OS Services Guide
Syntax lag
Context tools>perform
Description This command configures tools to control LAG.
clear-force
Syntax clear-force all-mc
clear-force lag-id lag-id [sub-group sub-group-id]
clear-force peer-mc ip-address
Context tools>perform>lag
Description This command clears a forced status.
Parameters all-mc —
lag-id lag-id — Specify an existing LAG id.
Values 1 — 200
sub-group sub-group-id —
peer-mc ip-address —
force
Syntax force all-mc {active | standby}
force lag-id lag-id [sub-group sub-group-id] {active | standby}
force peer-mc peer-ip-address {active | standby}
Context tools>perform>lag
Description This command forces an active or standy status.
Parameters active — If active is selected, then all drives on the active CPM are forced.
standby — If standby is selected, then all drives on the standby CPM are forced.
all-mc —
lag-id lag-id — Specify an existing LAG id.
Values 1 — 200
sub-group sub-group-id —
peer-mc peer-ip-address —
log