Tools Configuration Commands
Page 1494 7750 SR OS Services Guide
force-switchover
Syntax force-switchover sdp-id:vc-id
no force-switchover
Context tools>perform>service>id
Description This command forces a switch of the active spoke SDP for the specified service.
Parameters sdp-id:vc-id — Specify an existing spoke SDP for the service.
subscriber-mgmt
Syntax subscriber-mgmt
Context tools>perform
Description This command enables tools to control subscriber management.
edit-lease-state
Syntax edit-lease-state sap sap-id ip ip-address [subscriber sub-ident-string] [sub-profile-string
sub-profile-string] [sla-profile-string sla-profile-string]
edit-lease-state svc-id service-id ip ip-address [subscriber sub-ident-string] [sub-profile-
string sub-profile-string] [sla-profile-string sla-profile-string]
Context tools>perform>subscr-mgmt
Parameters sap sap-id — Specifies the physical port identifier portion of the SAP definition.
Values sap-id: null [port-id | bundle-id | bpgrp-id | lag-id | aps-id]
dot1q [port-id | bundle-id | bpgrp-id | lag-id | aps-id]:qtag1
qinq [port-id | bundle-id | bpgrp-id | lag-id]:qtag1.qtag2
atm [port-id | aps-id | bundle-id | bpgrp-id][:vpi/vci |vpi |vpi1.vpi2]
frame [port-id
| bundle-id]:dlci
cisco-hdlc slot/mda/port.channel
port-id slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 64
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 — 128
bpgrp-id: bpgrp-type-bpgrp-num
bpgrp keyword
type ima
bpgrp-num 1 — 1280
ccag-id ccag-id.path-id[cc-type]:cc-id
ccag keyword
To Next Page
Loading...
