Alcatel-Lucent 7750 SR OS - Page 174

Configuring a VLL Service with CLI
Page 174 7750 SR OS Services Guide
config>service>epipe>spoke-sdp>ingress# vc-label 6600
config>service>epipe>spoke-sdp>ingress# exit
config>service>epipe>spoke-sdp# no shutdown
ALA-2>config>service# epipe 5500
config>service>epipe# spoke-sdp 2:456
config>service>epipe>spoke-sdp# egress
config>service>epipe>spoke-sdp>egress# vc-label 6600
config>service>epipe>spoke-sdp>egress# exit
config>service>epipe>spoke-sdp# ingress
config>service>epipe>spoke-sdp>ingress# vc-label 5500
config>service>epipe>spoke-sdp>ingress# exit
config>service>epipe>spoke-sdp# no shutdown
This example displays the SDP binding for the Epipe service between ALA-1 and ALA-2:
ALA-1>config>service# info
----------------------------------------------
...
epipe 5500 customer 5 vpn 5500 create
description "Distributed epipe service to east coast"
sap 2/1/3:21 create
ingress
qos 555
filter ip 1
exit
egress
scheduler-policy "alpha"
qos 627
exit
exit
spoke-sdp 2:123 create
ingress
vc-label 6600
exit
egress
vc-label 5500
exit
exit
no shutdown
exit
...
----------------------------------------------
ALA-1>config>service#
ALA-2>config>service# info
----------------------------------------------
...
exit
epipe 5500 customer 5 vpn 5500 create
description "Distributed epipe service to west coast"
sap 4/1/4:550 create
ingress
qos 654
filter ip 1020
exit
egress
scheduler-policy "test1"
qos 432
filter ip 6