Alcatel-Lucent 7750 SR OS - Page 203

Virtual Leased Line Services
7750 SR OS Services Guide Page 203
The following example displays the configuration:
*A:ALA-49>config>service>epipe# info
----------------------------------------------
endpoint "x" create
exit
endpoint "y" create
revert-time 100
exit
sap 2/2/2:200 endpoint "x" create
exit
spoke-sdp 4:400 endpoint "y" create
precedence primary
exit
spoke-sdp 5:500 endpoint "y" create
precedence 1
exit
spoke-sdp 6:600 endpoint "y" create
precedence 1
exit
no shutdown
----------------------------------------------
*A:ALA-49>config>service>epipe#
S-PE1
Example:config>service# epipe 1 customer 1 vc-switching create
config>service>epipe# spoke-sdp 1:100 create
config>service>epipe>spoke-sdp$ no shutdown
config>service>epipe>spoke-sdp$ exit
config>service>epipe# spoke-sdp 4:400 create
config>service>epipe>spoke-sdp$ no shutdown
config>service>epipe>spoke-sdp$ exit
config>service>epipe# no shutdown
The following example displays the configuration:
*A:ALA-50>config>service>epipe# info
----------------------------------------------
...
spoke-sdp 1:100 create
exit
spoke-sdp 4:400 create
exit
no shutdown
----------------------------------------------
*A:ALA-49>config>service>epipe#
See details on the rules for the determination of the active transmit endpoint object based on
endpoint status transitions in VLL Endpoint Active Transmit Object Selection Rules on page 139.