Alcatel-Lucent 7750 SR OS - Page 280

VLL Service Configuration Commands
Page 280 7750 SR OS Services Guide
Output Show Service Ingress-Label — The following table describes show service ingress-label output
fields:
Sample Output
*A:ALA-12# show service ingress-label 0
==============================================================================
Martini Service Labels
==============================================================================
Svc Id Sdp Id Type I.Lbl E.Lbl
------------------------------------------------------------------------------
1 10:1 Mesh 0 0
1 20:1 Mesh 0 0
1 30:1 Mesh 0 0
1 50:1 Mesh 0 0
1 100:1 Mesh 0 0
1 101:1 Mesh 0 0
1 102:1 Mesh 0 0
1 103:1 Mesh 0 0
1 104:1 Mesh 0 0
1 105:1 Mesh 0 0
1 106:1 Mesh 0 0
1 107:1 Mesh 0 0
1 108:1 Mesh 0 0
1 300:1 Mesh 0 0
1 301:1 Mesh 0 0
1 302:1 Mesh 0 0
1 400:1 Mesh 0 0
100 300:100 Spok 0 0
200 301:200 Spok 0 0
300 302:300 Spok 0 0
400 400:400 Spok 0 0
------------------------------------------------------------------------------
Number of Bindings Found : 21
------------------------------------------------------------------------------
*A:ALA-12#
Label Description
Svc ID
The service identifier.
SDP Id
The SDP identifier.
Type
Indicates whether the SDP is a spoke or a mesh.
I.Lbl
The ingress label used by the far-end device to send packets to this
device in this service by the SDP.
E.Lbl
The egress label used by this device to send packets to the far-end
device in this service by the SDP.
Number of Bindings
Found
The number of SDP bindings within the label range specified.