Virtual Leased Line Services
7750 SR OS Services Guide Page 285
Adm
Admin State
Specifies the desired state of the SDP.
Opr
Oper State
Specifies the operating state of the SDP.
Deliver
Delivery
Specifies the type of delivery used by the SDP: GRE or MPLS.
Flags
Specifies all the conditions that affect the operating status of this SDP.
Signal
Signaling
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on the SDP.
Last Status Change
Specifies the time of the most recent operating status change to this
SDP.
Last Mgmt Change
Specifies the time of the most recent management-initiated change to
this SDP.
Number of SDPs
Specifies the total number of SDPs displayed according to the criteria
specified.
Hello Time
Specifies how often the SDP Echo Request messages are transmitted
on this SDP.
Number of SDPs
Specifies the total number of SDPs displayed according to the criteria
specified.
Hello Time
Specifies how often the SDP Echo Request messages are transmitted
on this SDP.
Hello Msg Len
Specifies the length of the SDP Echo Request messages transmitted on
this SDP.
Hello Timeout
Specifies the number of seconds to wait for an SDP echo response
message before declaring a timeout.
Unmatched Replies
Specifies the number of SDP unmatched message replies. timer
expired.
Max Drop Count
Specifies the maximum number of consecutive SDP Echo Request
messages that can be unacknowledged before the keepalive protocol
reports a fault.
Hold Down Time
Specifies the amount of time to wait before the keepalive operating
status is eligible to enter the alive state.
TX Hello Msgs
Specifies the number of SDP echo request messages transmitted since
the keepalive was administratively enabled or the counter was cleared.
Rx Hello Msgs
Specifies the number of SDP echo request messages received since the
keepalive was administratively enabled or the counter was cleared.
Label Description
To Next Page
Loading...
