VLL Service Configuration Commands
Page 304 7750 SR OS Services Guide
lease-state
Syntax lease-state [[sap sap-id]  [sdp [sdp-id[:vc-id]]] | [interface interface-name] | [ip-address ip-
address[/mask]] | [mac ieee-address] | [wholesaler service-id] ] [detail]
Context show>service>id>dhcp
Description This command displays DHCP lease state information. Note that the wholesaler service-id parameter 
is applicable only in the VPRN context.
Parameters interface interface-name — Displays information for the specified IP interface.
ip-address ip-address — Displays information associated with the specified IP address.
detail — Displays detailed information.
wholesaler service-id — The VPRN service ID of the wholesaler. When specified in this context, 
SAP, SDP, interface, IP address and MAC parameters are ignored. 
Values 1 — 2147483647
Values
sap-id — Specifies the physical port identifier portion of the SAP definition.
Values sap-id: null [port-id | bundle-id | bpgrp-id | lag-id | aps-id]
dot1q [port-id | bundle-id | bpgrp-id | lag-id | aps-id]:qtag1
qinq [port-id | bundle-id | bpgrp-id | lag-id]:qtag1.qtag2
atm [port-id | aps-id 
| bundle-id | bpgrp-id][:vpi/vci |vpi |vpi1.vpi2]
frame [port-id | bundle-id]:dlci
cisco-hdlc  slot/mda/port.channel
port-id slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 64
bundle-type-slot/mda.bundle-num
bundle keyword
type  ima, ppp
bundle-num  1 — 128
bpgrp-id:  bpgrp-type-bpgrp-num
bpgrp keyword
type ima
bpgrp-num  1 — 1280
ccag-id ccag-id.path-id[cc-type]:cc-id
ccag keyword
id 1 — 8
path-id a, b
cc-type .sap-net, .net-sap]
cc-id 0 — 4094
lag-id lag-id
lag keyword
id  1 — 200
  
qtag1 0 — 4094
qtag2 *, 0 — 4094