VLL Service Configuration Commands
Page 306 7750 SR OS Services Guide
retailers
Syntax retailers
Context show>service>id
Description This command displays the service ID of the retailer subscriber service to which this DHCP lease
belongs.
wholesalers
Syntax wholesalers
Context show>service>id
Description This command displays service wholesaler information.
sap
Syntax sap sap-id [detail]
Context show>service>id
Description Displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters sap-id — The ID that displays SAPs for the service in the form slot/mda/port[.channel].
interface interface-name — Displays information for the specified IP interface.
ip-address ip-address — Displays information associated with the specified IP address.
detail — Displays detailed information.
wholesaler service-id — The VPRN service ID of the wholesaler. When specified in this context,
SAP, SDP, interface, IP address and MAC parameters are ignored.
Values 1 — 2147483647
detail — Displays detailed information for the SAP.
Output Show Service-ID SAP — The following table describes show service SAP fields:
Label Description
Service Id
The service identifier.
SAP
The SAP and qtag.
Encap
The encapsulation type of the SAP.
Ethertype
Specifies an Ethernet type II Ethertype value.