Alcatel-Lucent 7750 SR OS - Page 424

Configuring a VPLS Service with CLI
Page 424 7750 SR OS Services Guide
The following example displays the VPLS configuration on ALA-A4 (bottom right, IP address
10.0.0.40):
*A:ALA-A2>config>service# info
----------------------------------------------
...
sdp 101 mpls create
far-end 10.0.0.20
lsp "1toALA-B2"
no shutdown
exit
sdp 102 mpls create
far-end 10.0.0.20
lsp "2toALA-B2"
no shutdown
exit
...
vpls 101 customer 1 m-vpls create
spoke-sdp 101:1 create
stp
path-cost 1000
exit
exit
mesh-sdp 300:1 create
exit
stp
exit
no shutdown
exit
vpls 102 customer 1 m-vpls create
spoke-sdp 102:2 create
stp
path-cost 1
exit
exit
mesh-sdp 300:2 create
exit
stp
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-A2>config>service#