Virtual Private LAN Services
7750 SR OS Services Guide Page 469
Values 1 — 100
Default 95%
mfib-table-low-wmark
Syntax [no] mfib-table-low-wmark low-water-mark
Context config>service>vpls
Description This command specifies the multicast FIB low watermark. When the percentage filling level of the
Multicast FIB drops below the configured value, the corresponding trap is cleared and/or a log entry
is added.
Parameters low-water-mark — Specifies the multicast FIB low watermark as a percentage.
Values 1 — 100
Default 90%
mfib-table-size
Syntax mfib-table-size size
no mfib-table-size
Context config>service>vpls
Description This command specifies the maximum number of (s,g) entries in the multicast forwarding database
(MFIB) for this VPLS instance.
The mfib-table-size parameter specifies the maximum number of multicast database entries for both
learned and static multicast addresses for the VPLS instance.
When a table-size limit is set on the mfib of a service which is lower than the current number of
dynamic entries present in the mfib then the number of entries remains above the limit.
The no form of this command removes the configured maxium MFIB table size.
Default none
Parameters size — The maximum number of (s,g) entries allowed in the Multicast FIB.
Values 1 — 16383
remote-age
Syntax remote-age seconds
no remote-age
Context config>service>vpls
Description Specifies the aging time for remotely learned MAC addresses in the forwarding database (FDB) for
the Virtual Private LAN Service (VPLS) instance.
To Next Page
Loading...
