Alcatel-Lucent 7750 SR OS - Page 494

VPLS Service Configuration Commands
Page 494 7750 SR OS Services Guide
The sap-id can be configured in one of the following formats:
Values sap-id: null [port-id | bundle-id | bpgrp-id | lag-id | aps-id]
dot1q [port-id | bundle-id | bpgrp-id | lag-id | aps-id]:qtag1
qinq [port-id | bundle-id | bpgrp-id | lag-id]:qtag1.qtag2
atm [port-id | aps-id | bundle-id | bpgrp-id][:vpi/vci |vpi |vpi1.vpi2]
frame [port-id | bundle-id]:dlci
cisco-hdlc slot/mda/port.channel
port-id slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 64
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 — 128
bpgrp-id: bpgrp-type-bpgrp-num
Type Syntax Example
port-id slot/mda/port[.channel]2/2/11
1/2/3.1
null [port-id | bundle-id| bpgrp-id | lag-id | aps-id] port-id: 1/2/3
bundle-id: bundle-ppp-1/1.1
bpgrp-id: bpgrp-ima-1
lag-id: lag-100
aps-id: aps-1
dot1q [port-id | bundle-id| bpgrp-id | lag-id | aps-
id]:qtag1
port-id:qtag1: 1/2/3:100
bundle-id: bundle-ppp-1/1.1
bpgrp-id: bpgrp-ima-1
lag-id:qtag1:lag-100:102
aps-id:qtag1: aps-1:103
qinq [port-id | bundle-id| bpgrp-id | lag-
id]:qtag1.qtag2
port-id:qtag1.qtag2: 1/2/3:100.10
bundle-id: bundle-ppp-1/1.1
bpgrp-id: bpgrp-ima-1
lag-id:qtag1.qtag2:lag-100:
atm [port-id | aps-id | bundle-id | bpgrp-id][:vpi/vci
|vpi |vpi1.vpi2]
port-id: 9/1/1
aps-id: aps-1
bundle-id: bundle-ima-1/1.1
bundle-ppp-1/1.1
bpgrp-id: bpgrp-ima-1
vpi/vci: 16/26
vpi: 16
vpi1.vpi2: 16.200
frame-relay [port-id | aps-id]:dlci port-id: 1/1/1:100
aps-id: aps-1
dlci: 16
cisco-hdlc
slot/mda/port.channel port-id: 1/2/3.1