Virtual Private LAN Services
7750 SR OS Services Guide Page 531
subscriber using the subscriber profile. Subscriber profiles also allow for specific SLA profile
definitions when the default definitions from the subscriber identification policy must be overridden.
The no form of the command removes the default SLA profile from the SAP configuration.
Parameters default-sub-profile — Specifies a default subscriber profile for this SAP. The subscriber profile must
be defined prior to associating the profile with a SAP in the config>subscriber-mgmt>sub-
profile context.
mac-da-hashing
Syntax [no] mac-da-hashing
Context config>service>vpls>sap>sub-sla-mgmt
Description This command specifies whether subscriber traffic egressing a LAG SAP has its egress LAG link
selected by a function of the MAC destination address instead of the subscriber ID.
This command is only meaningful if subscriber management is enabled and can be configured for this
VPLS service.
multi-sub-sap
Syntax multi-sub-sap [subscriber-limit]
no multi-sub-sap
Context config>service>vpls>sap>sub-sla-mgmt
Description This command configures the maximum number of subscribers for this SAP.
The no form of this command returns the default value.
Parameters number-of-sub — Specifies the maximum number of subscribers for this SAP.
Values 2 — 8000
non-sub-traffic
Syntax non-sub-traffic sub-profile sub-profile-name sla-profile sla-profile-name [subscriber sub-
ident-string]
no non-sub-traffic
Context config>service>vpls>sap>sub-sla-mgmt>single-sub
Description This command configures non-subscriber traffic profiles.
The no form of the command removes the profiles and disables the feature.
Parameters sub-profile sub-profile-name — Specifies an existing subscriber profile name to be associated with
the static subscriber host. The subscriber profile is configured in the config>subscr-mgmt>sub-
profile context.
To Next Page
Loading...
