VPLS Service Configuration Commands
Page 538 7750 SR OS Services Guide
level
Syntax level level-id bw bandwidth
no level level-id
Context config>service>vpls>sap>snooping>mcac>mc-constraints
Description This command configures levels and their associated bandwidth for multicast cac policy on this
interface.
Parameters level-id — Specifies has an entry for each multicast CAC policy constraint level configured on this
system.
Values 1 — 8
bandwidth — Specifies the bandwidth in kilobits per second (kbps) for the level.
Values 1 — 2147483647
number-down
Syntax number-down number-lag-port-down
no number-down
Context config>service>vpls>sap>snooping>mcac>mc-constraints
Description This command configure the number of ports down along with level for multicast cac policy on this
interface.
Default not enabled
max-num-groups
Syntax max-num-groups count
no max-num-groups
Context config>service>vpls>sap>snooping
config>service>vpls>spoke-sdp>snooping
config>service>vpls>mesh-sdp>snooping
Description This command defines the maximum number of multicast groups that can be joined on this SAP or
SDP. If the SR-Series receives an IGMP join message that would exceed the configured number of
groups, the request is ignored.
Default no max-num-groups
Parameters count — Specifies the maximum number of groups that can be joined on this SAP or SDP.
Values 1 — 1000
To Next Page
Loading...
