Virtual Private LAN Services
7750 SR OS Services Guide Page 555
The no form of the command returns the egress-multicast-group dot1q EtherType to the default value
of 0x8100. If the current encap-type is set to a value other then 0x8100, the command cannot be
executed when SAPs exist within the egress-multicast-group.
Default The default dot1q-etype is 0x8100 for an egress-multicast-group.
Parameters ethertype — Defines the dot1q EtherType that must be associated with a SAP’s access port when the
encap-type is set to dot1q. Any valid EtherType may be specified.
Values [0x0600 — 0xffff]: [1536 — 65535] in decimal or hex
Default 0x8100
To Next Page
Loading...
