VPLS Service Configuration Commands
Page 560 7750 SR OS Services Guide
Sample Output
*A:ALA-12# show service egress-label 0 10000
==============================================================================
Martini Service Labels
==============================================================================
Svc Id Sdp Id Type I.Lbl E.Lbl
------------------------------------------------------------------------------
1 10:1 Mesh 0 0
1 20:1 Mesh 0 0
1 30:1 Mesh 0 0
1 100:1 Mesh 0 0
...
1 107:1 Mesh 0 0
1 108:1 Mesh 0 0
1 300:1 Mesh 0 0
1 301:1 Mesh 0 0
1 302:1 Mesh 0 0
1 400:1 Mesh 0 0
1 500:2 Spok 131070 2001
1 501:1 Mesh 131069 2000
100 300:100 Spok 0 0
200 301:200 Spok 0 0
300 302:300 Spok 0 0
400 400:400 Spok 0 0
------------------------------------------------------------------------------
Number of Bindings Found : 23
==============================================================================
*A:ALA-12#
fdb-info
Syntax fdb-info
Context show>service
Description Displays global FDB usage information.
Output Show FDB-Info Command Output — The following table describes show FDB-Info command
output.
Label Description
Service ID
The ID that identifies a service.
Mac Move
Indicates the administrative state of the MAC movement feature associ-
ated with the service.
Mac Move Rate
The maximum rate at which MAC's can be re-learned in this TLS ser-
vice, before the SAP where the moving MAC was last seen is automati-
cally disabled in order to protect the system against undetected loops or
duplicate MAC's.
The rate is computed as the maximum number of re-learns allowed in a
5 second interval: e.g. the default rate of 10 re-learns per second corre-
sponds to 50 re-learns in a 5 second period.
To Next Page
Loading...
