VPLS Service Configuration Commands
Page 566 7750 SR OS Services Guide
cc-id 0 — 4094
lag-id lag-id
lag keyword
id 1 — 200
qtag1 0 — 4094
qtag2 *, 0 — 4094
vpi NNI 0 — 4095
UNI 0 — 255
vci 1, 2, 5 — 65535
dlci 16 — 1022
interface — Specifies matching SAPs with the specified IP interface.
ip-addr — The IP address of the interface for which to display matching SAPs.
Values 1.0.0.0 — 223.255.255.255
ip-int-name — The IP interface name for which to display matching SAPs.
Output Show Service SAP — The following table describes show service SAP output fields:
Sample Output
A:ALA-701# show service sap-using
===============================================================================
Service Access Points
===============================================================================
PortId SvcId Ing. Ing. Egr. Egr. Anti Adm Opr
QoS Fltr QoS Fltr Spoof
-------------------------------------------------------------------------------
1/1/3 10203041 1 ip4 1 none none Up Up
1/1/4 10203042 1 none 1 ip4 none Up Up
-------------------------------------------------------------------------------
Label Description
Port ID The ID of the access port where the SAP is defined.
Svc ID The service identifier.
SapMTU The SAP MTU value.
I.QoS The SAP ingress QoS policy number specified on the ingress SAP.
I.MAC/IP The MAC or IP filter policy ID applied to the ingress SAP.
E.QoS The SAP egress QoS policy number specified on the egress SAP.
E.Mac/IP The MAC or IP filter policy ID applied to the egress SAP
A.Pol The accounting policy ID assigned to the SAP.
Adm The desired state of the SAP.
Opr The actual state of the SAP.
To Next Page
