VPLS Service Configuration Commands
Page 590 7750 SR OS Services Guide
Sample Output
*A:7450# show service id 1 dhcp statistics
====================================================
DHCP Statistics, service 1
====================================================
Client Packets Snooped : 0
Client Packets Forwarded : 0
Client Packets Dropped : 0
Client Packets Proxied (RADIUS) : 0
Client Packets Proxied (Lease-Split) : 0
Server Packets Snooped : 0
Server Packets Forwarded : 0
Server Packets Dropped : 0
DHCP RELEASEs Spoofed : 0
DHCP FORCERENEWs Spoofed : 0
====================================================
A:test#
summary
Syntax summary
Context show>service>id>dhcp
Description Show Service-ID DHCP Summary — The following table describes show service-id DHCP
summary output fields:
Server Packets
Snooped
The number of packets received from the DHCP server that were
snooped.
Server Packets
Forwarded
The number of packets received from the DHCP server that were
forwarded.
Server Packets
Dropped
The number of packets received from the DHCP server that were
dropped.
Label Description
Label Description
Sap/Sdp
The configuration identification, expressed by a string containing “card/
mda/port/:logical-id”.
Snoop
Yes — The packets received from the DHCP clients were snooped.
No - The packets received from the DHCP clients were not snooped
Used/Provided
Used — The number of lease-states that are currently in use on a specific
interface, that is, the number of clients on that interface got an IP address
by DHCP. This value is always less than or equal to the ‘Provided’ field.
Provided — The lease-populate value that is configured for a specific
interface.
To Next Page
Loading...
