Alcatel-Lucent 7750 SR OS - Page 595

Virtual Private LAN Services
7750 SR OS Services Guide Page 595
sessions
Syntax sessions [group name] neighbor ip-address] [ port port-number] [association] [statistics]
Context show>service>id>gsmp
Description This command displays GSMP sessions information.
Parameters group — A GSMP group defines a set of GSMP neighbors which have the same properties.
name — Specifies a GSMP group name is unique only within the scope of the service in which it is
defined.
ip-address — Specifies the ip-address of the neighbor.
port — Specifies the neighbor TCP port number use for this ANCP session.
Values 0 — 65535
association — Displays to what object the ANCP-string is associated.
statistics — Displays statistics information about an ANCP session known to the system.
Description Show Sessions Neighbor Output — The following table describes show sessions neighbor
output fields:
Label Description
State
The current state of the ANCP session.
Peer Instance
The instance number of the ANCP session at the neighbor's side.
Sender Instance
The instance number of the ANCP session at our side.
Peer Port
The port number of the ANCP session at the neighbor's side.
Sender Port
The port number of the ANCP session at the local side.
Peer Name
The MAC address of the ANCP session at the neighbor's side.
Sender name
The mac address of the ANCP session at the local side.
timeouts
The number of adjacency protocol message timeouts.
Max. Timeouts
The maximum allowed of the above timeouts before closing.
Peer Timer
The timer value for the neighbor peridodic adjacency protocol messages.
Sender Timer
The timer value for the local peridodic adjacency protocol messages.
Capabilities
The negotiated capabilties for the Established ANCP session (DTD :
dynamic topology discovery - OAM : operation and maintenance).
Conf Capabili-
ties
The configured local capabilities.
Priority Mark-
ing
The DSCP bits for the IP messages used in the ANCP session.
Local Addr.
The destination IP address for this ANCP session.