Alcatel-Lucent 7750 SR OS - Page 612

VPLS Service Configuration Commands
Page 612 7750 SR OS Services Guide
Split Horizon
Group
Name of the split horizon group that the SDP belongs to.
VC Type
Displays the VC type: ether, vlan, or vpls.
VC Tag
Displays the explicit dot1Q value used when encapsulating to the SDP far
end.
I. Lbl
The VC label used by the far-end device to send packets to this device in
this service by the SDP.
Admin Path MTU
The operating path MTU of the SDP is equal to the admin path MTU (when
one is set) or the dynamically computed tunnel MTU, when no admin path
MTU is set (the default case.)
Oper Path MTU
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to be
fragmented.
Far End
Specifies the IP address of the remote end of the GRE or MPLS tunnel
defined by this SDP.
Delivery
Specifies the type of delivery used by the SDP: GRE or MPLS.
Admin State
The administrative state of this SDP.
Oper State
The current status of the SDP.
Ingress Label
The label used by the far-end device to send packets to this device in this
service by this SDP.
Egress Label
The label used by this device to send packets to the far-end device in this
service by the SDP.
Last Changed
The date and time of the most recent change to the SDP.
Signaling
Specifies the signaling protocol used to obtain the ingress and egress labels
used in frames transmitted and received on this SDP.
Admin State
The administrative state of the Keepalive process.
Oper State
The operational state of the Keepalive process.
Hello Time
Specifies how often the SDP Echo Request messages are transmitted on
this SDP.
Max Drop Count
Specifies the maximum number of consecutive SDP Echo Request
messages that can be unacknowledged before the keepalive protocol reports
a fault.
Hello Msg Len
Specifies the length of the SDP Echo Request messages transmitted on this
SDP.
Hold Down Time
Specifies the amount of time to wait before the keepalive operating status is
eligible to enter the alive state.
Label Description (Continued)