Virtual Private LAN Services
7750 SR OS Services Guide Page 623
IGMP Snooping Show Commands
igmp-snooping
Syntax igmp-snooping
Context show>service>id>
Description This command enables the context to display IGMP snooping information.
all
Syntax all
Context show>service>id>igmp-snooping
Description Displays detailed information for all aspects of IGMP snooping on the VPLS service.
Output Show All Service-ID — The following table describes the show all service-id command output
fields:
Label Description
Admin State
The administrative state of the IGMP instance.
Querier
Displays the address of the IGMP querier on the IP subnet to which the
interface is attached.
Sap/Sdp Id
Displays the SAP and SDP IDs of the service ID.
Oper State
Displays the operational state of the SAP and SDP IDs of the service
ID.
Mrtr Port
Specifies if the port is a multicast router port.
Send Queries
Specifies whether the send-queries command is enabled or disabled.
Max Num Groups
Specifies the maximum number of multicast groups that can be joined
on this SAP or SDP.
MVR From VPLS
Specifies MVR from VPLS.
Num Groups
Specifies the actual number of multicast groups that can be joined on
this SAP or SDP.
To Next Page
Loading...
