VPLS Service Configuration Commands
Page 626 7750 SR OS Services Guide
Robust Count : 2
-------------------------------------------------------------------------------
MRouter 10.20.1.6
-------------------------------------------------------------------------------
Sap Id : 2/1/2:1
Expires : 3s
Up Time : 0d 00:10:22
Version : 3
General Query Interval : 2s
Query Response Interval : 1.0s
Robust Count : 2
-------------------------------------------------------------------------------
Number of mrouters: 2
===============================================================================
*A:rbae_C#
mvr
Syntax mvr
Context show>service>id>igmp-snooping
Description Displays Multicast VPLS Registration (MVR) information.
Output Show All Service-ID — The following table describes the show all service-id command output
fields:
Sample Output
*A:ALA-1>show>service>id>snooping# mvr
===============================================================================
IGMP Snooping Multicast VPLS Registration info for service 10
Label Description
MVR Admin State
Administrative state.
MVR Policy
Policy name.
Svc ID
The service identifier.
Sap/Sdp Id
Displays the SAP and SDP IDs of the service ID.
Oper State
Displays the operational state of the SAP and SDP IDs of the service
ID.
Mrtr Port
Specifies if the port is a multicast router port.
From VPLS
Specifies from which VPLS the multicast streams corresponding to the
groups learned via this SAP will be copied. If local, it is from its own
VPLS.
Num Groups
Specifies the number of groups learned via this local SAP.
To Next Page
Loading...
