VPLS Service Configuration Commands
Page 628 7750 SR OS Services Guide
bundle-num 1 — 128
bpgrp-id: bpgrp-type-bpgrp-num
bpgrp keyword
type ima
bpgrp-num 1 — 1280
ccag-id ccag-id.path-id[cc-type]:cc-id
ccag keyword
id 1 — 8
path-id a, b
cc-type .sap-net, .net-sap]
cc-id 0 — 4094
lag-id lag-id
lag keyword
id 1 — 200
qtag1 0 — 4094
qtag2 *, 0 — 4094
vpi NNI 0 — 4095
UNI 0 — 255
vci 1, 2, 5 — 65535
dlci 16 — 1022
sdp sdp-id — Displays only IGMP snooping entries associated with the specified mesh SDP or
spoke SDP. For a spoke SDP, the VC ID must be specified, for a mesh SDP, the VC ID is
optional.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to display information.
Default For mesh SDPs only, all VC IDs.
Values 1 — 4294967295
group grp-address — Displays IGMP snooping statistics matching the specified group address.
source ip-address — Displays IGMP snooping statistics matching one particular source within the
multicast group.
Sample Output
*A:ALA-1>show>service>id>snooping# port-db sap 1/1/2
===============================================================================
IGMP Snooping SAP 1/1/2 Port-DB for service 10
===============================================================================
Group Address Mode Type Up Time Expires Num Sources
-------------------------------------------------------------------------------
225.0.0.1 include dynamic 0d 00:04:44 0s 2
-------------------------------------------------------------------------------
Number of groups: 1
===============================================================================
*A:ALA-1>show>service>id>snooping# port-db sap 1/1/2 detail
===============================================================================