Virtual Private LAN Services
7750 SR OS Services Guide Page 633
sdp sdp-id — Displays the IGMP snooping statistics for a specific spoke or mesh SDP.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to display information.
Default For mesh SDPs only, all VC IDs.
Values 1 — 4294967295
*A:ALA-1>show>service>id>snooping# statistics
===============================================================================
IGMP Snooping Statistics for service 1
===============================================================================
Message Type Received Transmitted Forwarded
-------------------------------------------------------------------------------
General Queries 4 0 4
Group Queries 0 0 0
Group-Source Queries 0 0 0
V1 Reports 0 0 0
V2 Reports 0 0 0
V3 Reports 0 0 0
V2 Leaves 0 0 0
Unknown Type 0 N/A 0
-------------------------------------------------------------------------------
Drop Statistics
-------------------------------------------------------------------------------
Bad Length : 0
Bad IP Checksum : 0
Bad IGMP Checksum : 0
Bad Encoding : 0
No Router Alert : 0
Zero Source IP : 0
Send Query Cfg Drops : 0
Import Policy Drops : 0
Exceeded Max Num Groups : 0
MVR From VPLS Cfg Drops : 0
MVR To SAP Cfg Drops : 0
===============================================================================
*A:ALA-1>show>service>id>snooping#
egress-replication
Syntax egress-replication
Context show
Description This command enables the context to display egress flooding information for a VPLS service context
on a given MDA. A VPLS service context supports both Layer 2 and Layer 3 flooding modes. The
Layer 2 flooding mode is used for broadcast, Layer 2 multicast and unknown destination MAC
addressed packets. All available interfaces (SAP, spoke-SDP and mesh-SDP) that reside on an egress
forwarding complex are included in the egress list except for SAPs that are defined in a residential
split horizon group (Layer 2 flooding is not permitted on residential SAPs). The Layer 3 flooding
To Next Page
Loading...
