Alcatel-Lucent 7750 SR OS - Page 660

VPLS Service Configuration Commands
Page 660 7750 SR OS Services Guide
interface
Syntax [no] interface [ip-int-name | ip-address]
Context debug>router>igmp
Description This command enables debugging on the IGMP interface.
Parameters ip-int-name — Only displays the information associated with the specified IP interface name.
ip-address — Only displays the information associated with the specified IP address.
mcs
Syntax [no] mcs [ip-int-name]
Context debug>router>igmp
Description This command enables debugging for IGMP MCS.
Parameters ip-int-name — Only displays the information associated with the specified IP interface name.
misc
Syntax [no] misc
Context debug>router>igmp
Description This command enables debugging for IGMP miscellany.
packet
Syntax [no] packet [query|v1-report|v2-report|v3-report|v2-leave] [ip-int-name|ip-address]
Context debug>router>igmp
Description This command enables debugging for IGMP packets.
Parameters query v1/v2/v3-report, v2-leave — Select the type of packet to debug.
ip-int-name — Only displays the information associated with the specified IP interface name.
ip-address — Only displays the information associated with the specified IP address.