Alcatel-Lucent 7750 SR OS - Page 744

IES Service Configuration Commands
Page 744 7750 SR OS Services Guide
Default no option
remote-id
Syntax remote-id [mac | string string]
no remote-id
Context config>service>ies>if>dhcp>option
config>service>ies>sub-if>grp-if>dhcp>option
Description When enabled, the router sends the MAC address of the remote end (typically the DHCP client) in the
remote-id suboption of the DHCP packet. This command identifies the host at the other end of the
circuit.
If disabled, the remote-id suboption of the DHCP packet will be left empty.
The no form of this command returns the system to the default.
Default remote-id
Parameters mac — This keyword specifies the MAC address of the remote end is encoded in the suboption.
string string — Specifies the remote-id.
vendor-specific-option
Syntax [no] vendor-specific-option
Context config>service>ies>if>dhcp>option
config>service>ies>sub-if>grp-if>dhcp>option
Description This command configures the vendor specific suboption of the DHCP relay packet.
client-mac-address
Syntax [no] client-mac-address
Context config>service>ies>if>dhcp>option>vendor
config>service>ies>sub-if>grp-if>dhcp>option>vendor
Description This command enables the sending of the MAC address in the vendor specific suboption of the DHCP
relay packet.
The no form of the command disables the sending of the MAC address in the vendor specific
suboption of the DHCP relay packet.
sap-id
Syntax [no] sap-id
Context config>service>ies>if>dhcp>option>vendor