Alcatel-Lucent 7750 SR OS - Page 770

IES Service Configuration Commands
Page 770 7750 SR OS Services Guide
SAP Subscriber Management Commands
sub-sla-mgmt
Syntax [no] sub-sla-mgmt
Context config>service>ies>sub-if>grp-if>sap
Description This command enables the context to configure subscriber management parameters for this SAP.
Default no sub-sla-mgmt
def-sla-profile
Syntax def-sla-profile default-sla-profile-name
no def-sla-profile
Context config>service>ies>sub-if>grp-if>sap>sub-sla-mgmt
Description This command specifies a default SLA profile for this SAP. The SLA profile must be defined prior to
associating the profile with a SAP in the config>subscriber-mgmt>sla-profile context.
An SLA profile is a named group of QoS parameters used to define per service QoS for all subscriber
hosts common to the same subscriber within a provider service offering. A single SLA profile may
define the QoS parameters for multiple subscriber hosts. SLA profiles are maintained in two
locations, the subscriber identification policy and the subscriber profile templates. After a subscriber
host is associated with an SLA profile name, either the subscriber identification policy used to
identify the subscriber or the subscriber profile associated with the subscriber host must contain an
SLA profile with that name. If both the subscriber identification policy and the subscriber profile
contain the SLA profile name, the SLA profile in the subscriber profile is used.
The no form of the command removes the default SLA profile from the SAP configuration.
Default no def-sla-profile
Parameters default-sla-profile-name — Specifies a default SLA profile for this SAP. The SLA profile must be
defined prior to associating the profile with a SAP in the config>subscriber-mgmt>sla-profile
context.
def-sub-profile
Syntax def-sub-profile default-subscriber-profile-name
Context config>service>ies>sub-if>grp-if>sap>sub-sla-mgmt
Description This command specifies a default subscriber profile for this SAP. The subscriber profile must be
defined prior to associating the profile with a SAP in the config>subscriber-mgmt>sub-profile
context.
A subscriber profile defines the aggregate QoS for all hosts within a subscriber context. This is done
through the definition of the egress and ingress scheduler policies that govern the aggregate SLA for