Alcatel-Lucent 7750 SR OS - Page 847

Internet Enhanced Services
7750 SR OS Services Guide Page 847
Description Display the status of the DHCP relay and DHCP snooping functions on each interface.
Output Show DHCP Summary Output — The following table describes the output fields for DHCP
summary.
Sample Output
A:ALA-49# show router dhcp summary
===============================================================================
DHCP Summary (Router: Base)
===============================================================================
Interface Name Arp Used/ Info Admin
SapId/Sdp Populate Provided Option State
-------------------------------------------------------------------------------
Sector A No 0/0 Keep Up
sap:7/1/1.2.2 0/0
grp-if No 0/1 Keep Down
ies-test No 0/0 Keep Up
sap:9/1/2:0/500 0/0
test No 0/0 Keep Up
sap:10/1/2:0 0/0
test1 No 0/0 Keep Up
sap:7/1/1.1.2 0/0
test2 No 0/0 Keep Up
sap:7/1/1.2.1 0/0
testA No 0/0 Keep Up
sap:7/1/3.1.1 0/0
testB No 0/0 Keep Up
sap:7/1/5.1.1 0/0
to-HQ No 0/0 Keep Up
sdp:spoke-2:1001 0/0
to-web No 0/0 Keep Up
sap:2/1/10:50 0/0
-------------------------------------------------------------------------------
Interfaces: 10
===============================================================================
A:ALA-49#
Label Description
Interface Name
Name of the router interface.
SapId/Sdp
Specifies the associated SAP ID or SDP ID.
Arp Populate
Specifies whether or not ARP populate is enabled.
Used/Provided
Used — The number of lease-states that are currently in use on a spe-
cific interface, that is, the number of clients on that interface got an IP
address by DHCP. This value is always less than or equal to the ‘Pro-
vided’ field.
Provided — The lease-populate value that is configured for a spe-
cific interface.
Info Option
Indicates whether Option 82 processing is enabled on the interface.
Admin State
Indicates the administrative state.